CW710R

High tensile brass (CuZn35Ni3Mn2AlPb).

CW 710R is a high tensile brass which is alloyed with aluminum, nickel and manganese etc. By alloying brass with strength-increasing elements, you get an alloy that is almost as hard as aluminum bronze, but considerably easier to process. The material also has good corrosion and wear resistance. This alloy is saltwater resistant.

Areas of use
Bearings for high load, slide- & wear-plates, valve guides, piston parts etc.

Shapes & forms
Solid round bars, tubes hexagonal bars, flat bars
 
 
 
 
 
 
 

Category:

Description

In addition to warehoused standard bronze alloys, we can also offer and deliver high-strength brass upon request. Please contact us for more details.

Chemical composition (Nom.)
– Cu              58 – 60 %
– Zn               Rest
– Ni               2,0-3,0 %
– Mn             1,5 – 2,5 %
– Al               0,3 – 1,3 %
– Pb              0,2 – 0,8 %
Max. impurities
– Fe               0,5 %
– Sn               0,5 %
– Si                < 0,1 %
– Others        < 0,3 %

Mechanical properties (nom.)
Yield strength (Rp N/mm²):                       300 N/mm²
Tensile strength (Rm N/mm²):                  490 N/mm²
Elongation in % A 5:                                      20 %
Hardness/Brinell:                                         150 HB
Density                                                            ∼ 8.1
Mating material: Min. surface hardness 350 HB. Rec. surface roughness <1 Ra

Additional information

Handelsvarunamn

C 86500, Cu Zn 35Ni2 Mn2 Al1, CW 710 R

Related products